|
|
A.C.C.
MACHINE
| To view the pdf version of the document, please click on the PDF button. In order to open the pdf file, Adobe Acrobat reader has to be installed on your computer. |
 |
|
| |
When the machine stops, hot air is blown on the fabric using an automatic by-pass system. The by-pass system functions automatically using pneumatic pistons based on the starting and stopping of the machine. This process prevents the fabric from burning and turning pale when the machine stops.
Both chambers contain single motor fabric breadth expansion systems. The amount of breadth expansion is measured using proximity sensors located on the motors and these values are displayed on the control monitor. The breadth of the machine can be completely opened. It can also be opened independently with 8 cm intervals. Breadth expansion switches are located at the outer part of the machine to avoid any damage from heat exposure. In order to perform fibre cleaning without stopping the machine, each chamber is equipped with tandem type air filters. |
|
 |
| |
EXHAUST CHIMNEYS
Each chamber is equipped with exhaust chimneys that absorb humid and spoiled air from left and right units in a balanced way. A manual controlled damper system exists at chamber exits. The exhaust chimneys which are custom designed with cylindrical shapes are equipped with cleaning covers. The exhaust motors which are inverter controlled are connected to radial chimney fans and their speed can be adjusted automatically. The exhaust chimneys are also equipped with steamer controlled fire extinguishing system. |
|
 |
| |
EXIT ZONE
Our machines which are usually manufactured with 3 metre long exit chains have the following properties:
The fabric coming out from the machine in a heated state is cooled down from both bottom and top sides using an air fanned fabric cooler.
The selvedge cutting of starched knitted fabric takes place at the selvedge cutting and selvedge absorbing units located at the exit zone of the machine. These units are imported from abroad. These units have minimum cutting capabilities which reduces fabric waste.
The inverter controlled exit roller is also used for batching.
The plaiting roller motor which has an independent operation capability is controlled by an inverter. Batching process can also be accomplished without plaiting. The machine is also equipped with a touch-screen control panel at the exit zone. From this panel it is possible to control the speed of the machine, exit roller, plaiting roller, and batching roller.
Selvedge cutting, absorber and cooling fan can also be controlled from another control panel located at the exit zone of the machine. A telephone circuit allows communication between the operator at the entry zone and the assistant operator at the exit zone of the machine. The exit zone of the machine can be observed on the monitor located at the entry of the machine using a camera.
|
|
|
|
|
A.C.C. Machine Electric - Electronic Co., Inc. All rights reserved. © 2005 |
