firma hakkinda urunler teknik servis iletisim bilgileri go to about us go to products go to technical support go to contact
 
 
A.C.C. MACHINE
A.C.C. STENTER
A.C.C. PADDER
To view the pdf version of the document, please click on the PDF button. In order to open the pdf file, Adobe Acrobat reader has to be installed on your computer.
A.C.C. STENTER DETAILS

INTRODUCTION
A.C.C. Stenter is equipped with an ergonomically designed computer controlled platform that allows the operator to operate the machine in an ideal manner. The software program installed on the computer controlled platform was completely designed by the software programmers of A.C.C. Machine. All the operation and monitoring of the stenter machine is carried out from the touch-screen monitor of the computer controlled platform.

 
 

COMPUTER CONTROL PANEL MENU INFORMATION:

Operations Menu: Date, time, lower/upper feeding, left/right brush, and exhaust speed are adjusted from this menu. Contains also the length counter.
Selection Menu: Left/right brush, selvedge dryer, steamer, lower/upper feeding, and expansion motor are adjusted from this menu.

Breadth Expansion Menu: Shows the dimensions of the breadth expansion spindles. The breadth of the machine can be completely opened. It can also be opened independently with 8 cm intervals.
Exhaust Menu: Invertor controlled exhaust fan motor and suction speed are adjusted from this menu.
Exit Menu: Exit roller speed, plaiting roller speed, batching roller speed and machine speed is adjusted from this menu.
Lubrication Menu: Lubrication and waiting periods are adjusted from this menu. Manual lubrication can also be selected from this menu.

Fan Menu: In this menu, all chamber fans can be automatically or manually started. Their speed can also be controlled from this menu.
Heat Control Menu: In this menu, the temperature of each chamber can be adjusted and displayed separately.

Process Control Menu: This menu shows customer information and machine settings for the processed fabrics. This information may be retrieved and applied for other fabrics as well.

Alarm Menu: In this menu, current and past alarm information for the machine is displayed.

The entrance frame contains spiral rollers for smoothing the selvedge curls and manually controlled diagonal acceptor rollers before the fabric enters the machine.

Contains lower and upper feeding rollers that is capable of providing a feeding capacity of 50 % for polyester, viscose and lycra fabrics. It is also equipped with pneumatic controlled chain feeding wheels and brushes that allows the fabric to be feeded through the pins at the same speed as the lower and upper feeding rollers mentioned above. The left and right chain feeding wheels and brushes can be adjusted to provide feeding at different speeds.

Entry chain unit is designed at 3 metre or 6 metre lengths for woven or knitted fabrics based on customer needs. The 6 metre chain entry unit is equipped with a breadth expansion system that expands the fabric in different steps.  

<< page 1 | page 2 | page 3 | page 4>>
 
A.C.C. Machine Electric - Electronic Co., Inc. All rights reserved. © 2005